X-SEAL TAPE is adhesive-backed and is applied to the substrate behind the X-SEAL ANCHOR for additional protection against air and moisture infiltration. X-SEAL™ TAPE should be applied in continuous lengths. Surface must be dry and free of oils, dirt, dust, loose rust scales or any other materials which might cause poor adhesion. Continuous lengths are recommended to facilitate maximum adhesion. For correct application of X-SEAL™ Tape, start from the bottom of the wall, up. Roll on with an evenly distributed pressure applied via 3" roller. Storage and protection: As recommended by manufacturer, store X-SEAL™ Tape at a temperature between 60°F (15.5°C) and 80°F (26.6°C). If exposed to lower temperatures, restore product to 60°F (15.5°C) minimum temperature before application.